Pipe Rehabilitation with CIPP Technologies

 

CIPP technologies are the group of procedures that use cured in place pipes to rehabilitate deteriorated pipes. We install a liner inside the cleaned pipe section. The liner consists of a textile that is able to carry the resin, resin and a coating. The textile material is installed in the pipe after impregnation with epoxy resin. We keep the liner under pressure until the resin cures. Curing can be achieved by higher temperature or UV light.

We use the Process Phoenix technology. Due to the different hose types this No-Dig technology can be applied to water, gas, industrial waste water and rainwater pipes too.

 

Tubetex Water

System pressure
Transported Medium potable water, industrial waste water, sewage, fire water, oil*
Host Pipe material steel, cast iron, reinforced concrete
Diameter 80-1200 mm
Shape circular
Working Pressure 1-32 bar
Fabrication circularly woven liner with polyethylene coating
Comment internal lining with adhesion

*applicable with special considerations

 

Tubetex Gas

System pressure
Transported Medium gas
Host Pipe material steel, cast iron
Diameter 80-1200 mm
Shape circular
Working Pressure 1-32 bar
Fabrication circularly woven liner with hyrtel coating
Comment internal lining with adhesion

*applicable with special considerations

 

 

Nordiwall

System gravity
Transported Medium sewage, rain water, industrial waste water
Host Pipe material concrete, clay, azbestos cement, KG PVC, cast iron
Diameter (mm, for circular profile) 200-1050 mm
Dimensions (mm, for egg profile) 200/300-900/1350 mm
Shape circular, egg
Fabrication polyester needle felt
Comment internal lining with adhesion

 

Nordiwall Flex

System gravity
Transported Medium sewage, rain water, industrial waste water
Host Pipe material concrete, clay, azbestos cement, KG PVC, cast iron
Diameter (mm, for circular profile) 150-1050 mm
Dimensions (mm, for egg profile) 200/300-900/1350 mm
Shape circular, egg
Fabrication single or double layer polyester needle felt structure with polypropylene coating, wallthickness from 2.5 to 8.5mm.
Comment internal lining with adhesion

 

Nordipipe

System pressure/gravity
Transported Medium potable water, fire water, industrial waste water, sewage, rainwater, oil*
Host Pipe material steel, cast iron, azbestos cement, clay, reinforced concrete, KG PVC, brick
Diameter (mm, for circular profile) 150-1200 mm
Dimensions (mm, for egg profile) 200/300-900/1350 mm
Shape circular, egg (gravity)
Fabrication polyester needle felt hose with polyethylene coating reinforced with glass structures
Comment internal lining with adhesion

*applicable with special considerations

 

Combiliner

System pressure
Transported Medium potable water, industrial waste water, sewage, fire water, oil*
Host Pipe material steel, cast iron, reinforced concrete
Diameter 80-1200 mm
Shape circular
Working Pressure 1-32 bar
Fabrication circularly woven liner with polyester needle felt polyethylene coating
Comment internal lining with adhesion

*applicable with special considerations

 

Brawoliner

System gravity
Transported Medium sewage, industrial waste water, rainwater
Host Pipe material concrete, PE, KG PVC, clay
Diameter 70-250 mm
Shape circular
Fabrication circularly woven liner with polyurethane coating
Comment internal lining with adhesion